Optical patch cord ST-ST

For laying modern high-speed networks, many experts recommend using only st-st optical patch cord. It is a reliable means of creating stable and high-speed communications between objects located at long distances. From us you can inexpensively buy optical patch cord st-st from the best manufacturers.

How to choose st-st optical patch cord
Transferring data at high speed is not an easy task. Before the advent of optics, twisted pair cable was used as the only method that had no analogues and no limits of perfection. With the growing number of active users, the requirements for transmitted data have increased. Bandwidth up to 2 Gbit is not sufficient to ensure reliable communication between servers and users.

This is why fiber optic lines were invented. Their peculiarity lies in the quality of data transmission in the form of a light beam. The factor of loss of at least one bit is excluded and damage to information is impossible when the cable is exposed to electromagnetic interference, but the throughput depends on the physical parameters of the patch cord.

We offer to buy optical patch cord st-st not only from different manufacturers, but also differing in a number of characteristics:

The diameter of the core and the cable as a whole are insulated. The larger the core, the more reliable the communication line. The data transfer speed does not depend on the size of the cord, but on the quality of execution and operation of the receiving and transmitting equipment.
Cable type. From us you can purchase st-st optical patch cord of two types depending on the data transmission method: Simplex or Duplex. The specific type depends on the purpose. To build industrial lines, unidirectional channels are often used.
We offer a large selection of fiber types, which differ mainly in thickness. For designation, code names from OM1 to OM4, G657A are used. In this case, OM indicates that the cable is multimode. OS1 and OS2 are single mode. The differences are in frequency. Thanks to the extended bandwidth, they are capable of transmitting data in excess of 10 Gbit per second.
When choosing an optical patch cord st-st, the cross-section of the light conductor and buffer is also taken into account. To indicate this characteristic, the ratios 9/125, 50/125 and 62.5/125 are used.
In addition to the different cross-sectional sizes, the patch cord also differs in the type of processing of the optical conductor. From us you can order a structured cable or with APC, UPC, UPC-APC coatings.

How to use optical patch cord st-st
If you are using an optical patch cord of the st-st type, then keep in mind that it is very capricious in terms of loads and physical influences. It cannot be bent with a radius of less than 5 cm. This will lead to destruction of the core. Moreover, the thicker it is, the larger the bend radius of the conductor should be.

Also, if you frequently connect and disconnect, make sure that the connector is clean. Any even the smallest dust will become a serious obstacle, which will lead to a decrease in productivity. Maintaining cleanliness of the connectors, careful laying and careful manipulation of the cable are important and fundamental requirements.

How to get an optical patch cord type st-st on the website?
We sell st-st patchcord wholesale and retail throughout Ukraine. We always have the required type of cable in stock, which guarantees you stable data transmission at any distance up to 1100 m from source to receiver. To purchase a multimode to build reliable communications at your enterprise, call us. You can also place an order for the cable directly on the website. If you have any questions, our consultant will answer them. We will help with delivery and calculation of the required quantity according to the square footage of the premises.