Corrugated Conduit Ø32 mm with Pull Wire, PVC, for Concrete, UV-Resistant, 750 N/5 cm, Black, 50 m, KOPOS 1232_F50D

KOPOS 1232_F50D Ø32/24.3 mm corrugated electrical conduit is designed for reliable protection and routing of power, telecommunication, network, signal and other cables. Thanks to its increased mechanical resistance of 750 N/5 cm, the conduit is suitable for installations where cable routes may be exposed to higher mechanical loads, including screed and concrete structures.

The conduit is made of durable PVC in black and features UV resistance, allowing it to be used in areas where exposure to sunlight is possible.

The model has an outer diameter of 32 mm and an inner diameter of 24.3 mm, providing sufficient internal space for routing larger-diameter cables or several cable lines.

The integrated pull wire makes cable insertion easier and significantly reduces installation time.

Key Advantages

• Increased mechanical resistance: 750 N/5 cm — suitable for cable routes requiring enhanced mechanical protection.

• Suitable for installation in screed and concrete structures.

• UV-resistant design — resistant to ultraviolet radiation.

• Pull wire included — simplifies and speeds up cable installation.

• Made of durable PVC.

• Outer diameter: 32 mm.

• Inner diameter: 24.3 mm.

• Suitable for surface-mounted and concealed installations.

• Can be installed on surfaces, in screed, under plaster, inside hollow and plastered walls, and in ceiling structures.

• Operating temperature range — -5 to +60 °C.

• Coil length — 50 m.

• Manufacturer — KOPOS.

Technical Specifications

• Type: corrugated electrical conduit with pull wire

• Manufacturer: KOPOS

• Model: 1232_F50D

• Material: PVC

• Colour: black

• UV resistance: yes

• Outer diameter: 32 mm

• Inner diameter: 24.3 mm

• Length: 50 m

• Length tolerance: ±1%

• Weight: 0.16 kg/m

• Mechanical resistance: 750 N/5 cm

• Operating temperature: -5 to +60 °C

• Reaction to fire of the base material: A1–F

• Classification code: 33212

• Standard: ČSN EN 61386-1 ed.2

• Packaging: supplied with pull wire

Applications

The KOPOS 1232_F50D corrugated conduit can be used for the protection and routing of:

• power cables;

• lighting cables;

• network and twisted-pair cables;

• telecommunication lines;

• CCTV system cables;

• alarm and security system cables;

• automation and control cables;

• other electrical and low-voltage cable systems.

The conduit is suitable for installation on surfaces, in screed, under plaster, inside hollow and plastered walls, in ceilings and other building structures. Its increased mechanical resistance makes it especially suitable for areas where more reliable protection against compression and other mechanical loads is required.

Installation in Hazardous Areas

The conduit may be installed in Zone 2 areas with a risk of explosion caused by combustible gases and vapours, as well as in Zone 22 areas with a risk of combustible dust explosions, provided that applicable project requirements and installation regulations are followed.

Installation Recommendations

The manufacturer recommends installing plastic conduits at ambient temperatures above 0 °C.

KOPOS 1232_F50D Ø32/24.3 mm corrugated conduit with pull wire, 750 N/5 cm, 50 m is a professional solution for creating protected cable routes in residential, commercial and industrial installations. Increased mechanical resistance, UV-resistant construction and the integrated pull wire provide reliable cable protection and convenient installation.