Corrugated Conduit with Pull Wire Ø16/10.7 mm, PVC, UV-Resistant, 50 m, Black KOPOS 1416E_F50D

KOPOS 1416E_F50D corrugated conduit is designed for protecting and routing electrical, telecommunication, signal and low-voltage cables. It is made of durable PVC in black and features UV resistance, making it suitable for installations where the conduit may be exposed to sunlight.

The conduit has an outer diameter of 16 mm and an inner diameter of 10.7 mm. The built-in pull wire significantly simplifies cable installation inside the conduit and helps speed up installation work.

The corrugated conduit is suitable for both surface-mounted and concealed installations: on surfaces, in screed, under plaster, inside hollow or plastered walls, and in ceiling structures.

Mechanical resistance of 320 N/5 cm provides additional protection for installed cables against moderate mechanical loads during installation and operation.

Key Advantages

• UV-resistant design for improved resistance to sunlight.
• Integrated pull wire for easier and faster cable installation.
• Made of durable PVC.
• Outer diameter: 16 mm.
• Inner diameter: 10.7 mm.
• Mechanical resistance: 320 N/5 cm.
• Suitable for both surface-mounted and concealed installation.
• Can be installed in screed, under plaster, in walls and ceilings.
• Coil length: 50 m.
• Manufactured by KOPOS.

Technical Specifications

• Type: corrugated electrical conduit with pull wire
• Manufacturer: KOPOS
• Model: 1416E D_F50D
• Material: PVC
• Colour: black
• UV resistance: yes
• Outer diameter: 16 mm
• Inner diameter: 10.7 mm
• Length: 50 m
• Length tolerance: ±1%
• Weight: 0.05 kg/m
• Mechanical resistance: 320 N/5 cm
• Operating temperature: -5 to +60 °C
• Classification code: 22212
• Standard: ČSN EN 61386-1 ed.2
• Reaction to fire of base material: A1–F
• Packaging: supplied with pull wire

Applications

KOPOS corrugated conduit can be used for routing:

• power cables;
• lighting cables;
• network and telecommunication cables;
• CCTV system cables;
• alarm and security system cables;
• other low-voltage wiring.

Suitable for installation on surfaces, in screed, under plaster, inside hollow and plastered walls, as well as in ceiling structures.

It may be installed in Zone 2 areas with a risk of explosive combustible gases and vapours, as well as in Zone 22 areas with a risk of combustible dust explosions, provided that applicable project requirements and installation regulations are followed.

Manufacturer's recommendation: installation of plastic conduits is recommended at ambient temperatures above 0 °C.

KOPOS 1416E_F50D Ø16/10.7 mm corrugated conduit with pull wire is a reliable solution for creating protected cable routes in residential, commercial and industrial installations. Its black UV-resistant design, flexible construction and integrated pull wire provide convenient and efficient cable installation.