Corrugated Conduit with Pull Wire Ø32/24.3 mm, PVC, 50 m, Light Grey KOPOS 1432_K50D

KOPOS 1432_K50D Ø32/24.3 mm corrugated electrical conduit is designed for the protection and routing of electrical, power, telecommunication, network and low-voltage cables. It is made of durable PVC in light grey and is supplied with a pull wire, which significantly simplifies cable insertion and reduces installation time.

The conduit is suitable for both surface-mounted and concealed installations. It can be installed on surfaces, in screed, under plaster, inside hollow and plastered walls, as well as in ceiling structures.

The conduit has an outer diameter of 32 mm and a minimum inner diameter of 24.3 mm. The increased internal space makes it suitable for routing larger-diameter cables or several cable lines, depending on project and installation requirements.

Mechanical resistance of 320 N/5 cm provides additional protection against moderate mechanical loads during installation and operation. The operating temperature range is -5 to +60 °C.

Key Advantages

• Pull wire included — simplifies and speeds up cable installation.
• 32 mm outer diameter — suitable for larger cables and grouped cable routing.
• Minimum inner diameter — 24.3 mm.
• Made of durable PVC.
• Mechanical resistance: 320 N/5 cm.
• Self-extinguishing time — 30 s.
• Suitable for surface-mounted and concealed installation.
• Can be installed in screed, under plaster, in walls and ceilings.
• Operating temperature — -5 to +60 °C.
• Coil length — 50 m.
• Manufacturer — KOPOS.

Technical Specifications

• Type: corrugated electrical conduit with pull wire
• Manufacturer: KOPOS
• Model: 1432_K50D
• Material: PVC
• Colour: light grey
• Outer diameter: 32 mm
• Inner diameter (min.): 24.3 mm
• Length: 50 m
• Length tolerance: ±1%
• Weight: 0.11 kg/m
• Mechanical resistance: 320 N/5 cm
• Operating temperature: -5 to +60 °C
• Self-extinguishing time: 30 s
• Reaction to fire of the base material: A1–F
• Classification code: 22212
• Standard: ČSN EN 61386-1 ed.2
• Packaging: supplied with pull wire

Applications

The KOPOS 1432_K50D corrugated conduit can be used for the protection and routing of:

• power cables;
• lighting cables;
• network and twisted-pair cables;
• telecommunication lines;
• CCTV system cables;
• alarm and security system cables;
• automation and control cables;
• other electrical and low-voltage cable systems.

The conduit is designed for installation on surfaces, in screed, under plaster, inside hollow and plastered walls, as well as in ceiling structures.

Installation in Hazardous Areas

The conduit may be installed in Zone 2 areas with a risk of explosion caused by combustible gases and vapours, as well as in Zone 22 areas with a risk of combustible dust explosions, provided that applicable project requirements and installation regulations are followed.

Installation Recommendations

The manufacturer recommends installing plastic conduits at ambient temperatures above 0 °C.

KOPOS 1432_K50D Ø32/24.3 mm corrugated conduit with pull wire, 50 m is a practical solution for creating protected cable routes in residential, office, commercial and industrial installations. Its flexible construction, mechanical resistance, increased inner diameter and integrated pull wire provide convenient installation and reliable cable protection.