Perforated Cable Duct 40×60 mm, 2 m, PVC, Grey RK 40X60_LD

RK 40X60_LD perforated cable duct, 40×60 mm is designed for organized routing, distribution, and management of wires and cables inside electrical panels, automation cabinets, control cabinets, and other electrical equipment.

The cable duct is made of PVC and features perforated side walls that allow individual wires to be conveniently routed to circuit breakers, terminal blocks, relays, controllers, power supplies, and other installed equipment.

The external dimensions of the duct are 40×60 mm, while the internal dimensions are 36×56 mm. Each section is 2 meters long. The grey color is suitable for use with standard electrical equipment and components installed inside electrical and control cabinets.

Where is it used?

The 40×60 mm perforated cable duct is used to create neat and organized cable routes and to distribute wiring inside electrical and technical equipment.

Suitable for installation in:

• electrical panels;
• distribution cabinets;
• automation cabinets;
• control cabinets;
• industrial electrical equipment;
• telecommunication and server cabinets;
• automation and control systems;
• low-voltage and engineering systems.

The duct can be used for routing power, signal, control, network, and other cable lines according to the requirements of the specific installation or project.

Advantages

• external dimensions: 40×60 mm;
• internal dimensions: 36×56 mm;
• section length: 2 m;
• made of PVC;
• perforated side walls for convenient wire routing;
• helps organize cable routes neatly;
• simplifies wire distribution between equipment components;
• provides convenient access to cables during maintenance;
• suitable for electrical panels and automation cabinets;
• can be used for power and low-voltage cabling systems;
• universal grey color.

Main Specifications

Design Features

The perforated side walls of the cable duct allow wires to be routed out at the required points directly to installed equipment. This is particularly convenient when assembling electrical panels and automation cabinets where a large number of conductors must be distributed between terminal blocks, circuit breakers, relays, controllers, power supplies, and other components.

The internal dimensions of 36×56 mm provide space for organized cable routing. When selecting a cable duct, the number and diameter of wires, permissible bending radius, and the required amount of spare space for future maintenance or system expansion should be taken into account.

RK 40X60_LD 40×60 mm perforated cable duct, 2 m is a practical solution for professional cable management inside electrical cabinets, control panels, automation systems, and telecommunications equipment.

Frequently Asked Questions

1. What are the external dimensions of the RK 40X60_LD cable duct?

The external dimensions are 40×60 mm.

2. What are the internal dimensions?

The internal dimensions of the cable duct are 36×56 mm.

3. What is the length of the cable duct?

Each section is 2 meters long.

4. What material is the cable duct made of?

The cable duct is made of PVC.

5. What is the purpose of the perforated side walls?

The perforations make it easy to route individual wires out of the duct at the required points and direct them to installed electrical or control equipment.

6. Is the RK 40X60_LD suitable for electrical panels?

Yes. The cable duct can be used to organize internal wiring in electrical panels, distribution cabinets, and other electrical equipment.

7. Can it be used in automation cabinets?

Yes. The perforated design is convenient for routing wires between controllers, terminal blocks, relays, circuit breakers, power supplies, and other components installed inside automation cabinets.

8. Can the cable duct be used for network cables?

Yes. It can be used for organized routing of network and other low-voltage cables, provided that the installation requirements of the specific cabling system are observed.

9. Can power cables be routed through this cable duct?

The duct can be used to organize power wires and cables. The requirements of the electrical installation design regarding cable routing and separation of different cable types should be followed.

10. Can power and signal cables be routed together?

The need to separate power, signal, and data cables depends on the requirements of the specific equipment, installation design, and applicable electrical installation rules.

11. Is this cable duct suitable for server cabinets?

Yes, provided that its dimensions and installation method are suitable for the design of the specific server or telecommunications cabinet.

12. Can the cable duct be cut to the required length?

During installation, the PVC cable duct can be cut to the required length using an appropriate tool suitable for working with PVC.

13. How do I determine whether 40×60 mm is the right size?

Consider the number of wires, their external diameter, permissible bending radius, and the amount of spare internal space required for convenient installation and future maintenance.

14. Why should spare space be left inside the cable duct?

Additional internal space makes cable installation easier, simplifies routing through the perforations, facilitates maintenance, and allows additional cable lines to be installed in the future.

15. Where are perforated cable ducts most commonly used?

Perforated cable ducts are commonly used inside electrical panels, distribution cabinets, automation and control cabinets, industrial equipment, and other systems where neat and structured wire management is required.