DKC Non-Perforated Cable Tray 50×100×3000 mm

The DKC non-perforated cable tray 50×100×3000 mm is designed for the organized, reliable, and safe routing of power, data, telecommunications, control, and low-voltage cables. Its solid bottom provides continuous cable support along the entire route and helps protect the wiring from dust, dirt, small debris, and accidental mechanical impact.

The tray is 50 mm high and 100 mm wide, allowing it to accommodate more cables than 50 mm-wide models. The section length is 3000 mm, or 3 metres. This format helps reduce the number of joints along straight cable runs, speeds up installation, and lowers the need for additional connecting components.

Protective Sendzimir Galvanized Coating

The metal cable tray features a protective zinc coating applied using the Sendzimir galvanizing process. The zinc layer improves the steel’s resistance to corrosion and helps preserve the performance of the cable management system over a long service life.

The Sendzimir galvanized finish is suitable for indoor installation in dry areas with normal humidity levels. The tray can be used in offices, commercial premises, warehouses, industrial facilities, server rooms, and technical areas.

Advantages of the DKC Non-Perforated Cable Tray

• solid bottom for continuous cable support;
• additional protection against dirt and mechanical damage;
• practical 50×100 mm dimensions;
• suitable for routing a larger number of cables;
• 3000 mm, or 3 m, section length;
• fewer joints on long cable routes;
• zinc-coated surface with corrosion-resistant properties;
• compatible with suitable covers, connectors, and mounting accessories;
• can be installed on walls, ceilings, or dedicated support structures;
• helps create a neat and organized cable management system.

Applications

The DKC 50×100 mm non-perforated cable tray is used to create metal cable routes in a wide range of facilities:

• offices and business centres;
• shops and retail complexes;
• warehouses and logistics centres;
• server rooms and telecommunications facilities;
• industrial workshops and technical areas;
• residential and commercial buildings;
• power supply and lighting systems;
• communication, automation, alarm, and CCTV systems.

Main Specifications

• Type: non-perforated cable tray;
• Manufacturer: DKC;
• Height: 50 mm;
• Width: 100 mm;
• Length: 3000 mm;
• Section length: 3 m;
• Material: metal;
• Construction: solid bottom, non-perforated;
• Finish: Sendzimir galvanized;
• Purpose: cable routing and cable management.

Installation Features

The tray is installed using compatible brackets, supports, hangers, connector plates, and other mounting components. The cable route can be installed along walls, below ceilings, or on dedicated supporting structures.

If required, the tray can be fitted with a compatible cover. The cover provides additional protection for installed cables against dust, dirt, accidental contact, and mechanical impact.

Before installation, the number, diameter, and total weight of the cables, the mounting method, operating conditions, and allowable spacing between supports should be considered. Properly selected accessories ensure the strength, stability, and convenient maintenance of the cable management system.

Frequently Asked Questions

What types of cables can be installed in the DKC 50×100 mm tray?

The tray can be used for routing power, data, telecommunications, control, and low-voltage cables. The cable diameter, quantity, and total weight should be considered when designing the system.

What do the dimensions 50×100×3000 mm mean?

The tray is 50 mm high, 100 mm wide, and 3000 mm, or 3 metres, long. The 100 mm width allows more cables to be accommodated than in narrower models.

What is the difference between a non-perforated and a perforated cable tray?

A non-perforated cable tray has a solid bottom without holes. It provides continuous cable support and offers better protection from below against dust, small debris, and accidental mechanical impact. A perforated tray has openings that simplify mounting and improve cable ventilation.

What are the advantages of the 3-metre length?

A 3-metre section reduces the number of joints on long straight cable runs. This simplifies installation, reduces the number of connectors required, and helps create a cleaner cable management system.

What is Sendzimir galvanizing?

Sendzimir galvanizing is an industrial process used to apply a protective zinc coating to steel sheet. The coating improves corrosion resistance and is recommended for indoor use in dry areas with normal humidity levels.

Can this tray be installed on a wall or ceiling?

Yes. The tray can be mounted on a wall, below a ceiling, or on dedicated support structures using compatible brackets, supports, hangers, and mounting hardware.

Is a cover required for the cable tray?

A cover is not always required, but it provides additional protection against dust, dirt, and mechanical impact. The need for a cover depends on the installation location and operating conditions.

Are connectors and mounting accessories included?

Mounting accessories are usually selected and ordered separately according to the cable route configuration. Before purchasing, it is recommended to check the product package and the compatibility of covers, connectors, brackets, and mounting hardware with the 50×100 mm tray.

How do I calculate the required number of cable trays?

Each section is 3 metres long. To estimate the required quantity, divide the total cable route length by 3 metres and allow additional material for cutting, bends, branches, and installation requirements.

The DKC non-perforated cable tray 50×100×3000 mm with Sendzimir galvanized finish is a practical solution for creating a reliable, spacious, and easy-to-maintain cable route in commercial, industrial, and technical facilities.