zakaz@net-server.com.ua
|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
NOYAFA NF-8209Pro
The NOYAFA NF-8209Pro is an RJ45/RJ11 cable tester and toner-probe kit for structured cabling installation and maintenance. It combines WireMap fault testing, PoE checks, switch-port identification and network cable length measurement up to 350 m.
Key features
- Find incorrect wire order, opens, shorts and crossed connections.
- The receiver includes WireMap for immediate testing after a cable is found.
- Analog and digital tracing modes help locate lines in noisy environments.
- Measure the length of individual Cat.5/Cat.6 cable pairs.
- PoE tests show supply voltage and power delivery mode.
- Port Flash helps identify the matching switch port.
- RJ45 crimp checks and a backlit display support onsite work.
Technical specifications
| Model | NOYAFA NF-8209Pro |
|---|---|
| Interfaces | RJ45/RJ11 |
| Length test range | 5–350 m |
| Cable types | Cat.5/Cat.6 twisted pair |
| Main tests | WireMap, PoE, Port Flash, length |
| Tracing | Analog and digital modes |
| Additional check | RJ45 crimp test |
| Display | Backlit 128 × 64 LCD |
Practical benefits and capabilities
NF-8209Pro is intended for installers handling numerous twisted-pair runs. In addition to WireMap, it helps trace a target cable, measure its length, test PoE and identify the connected switch port.
Where it is used
- acceptance testing of newly installed Cat.5/Cat.6 lines
- finding breaks and incorrectly crimped RJ45 plugs
- measuring twisted-pair cable length during installation
- tracing lines through bundles and network cabinets
- checking PoE and locating switch ports via Port Flash
How to use the instrument
- Connect an unpowered line to WireMap to inspect conductor order and wiring faults.
- Select Length to measure compatible Cat.5/Cat.6 cable runs; the specified range is 5–350 m.
- Use the transmitter and receiver to trace the cable, selecting the anti-interference mode when needed.
- Use the designated ports for PoE and Port Flash, not the cable length test input.
Important guidelines and limitations
Do not measure cable length while it is connected to active network equipment or a powered source. Shielding, induced noise and dense cable bundles may affect tracing performance.
Frequently asked questions
What is the maximum length measurement range?
The manufacturer specifies up to 350 m in Length mode for compatible network cables.
Can it detect bad RJ45 crimps?
Yes. WireMap and QC functions help check wire order and connector termination quality.
Can it find a switch port?
Yes. Port Flash identifies the port by its blinking indicator.
Why use the anti-interference tracing mode?
It helps distinguish the target cable among nearby cabling and electrical interference.
Does it check PoE?
Yes. Its PoE mode checks power presence, voltage and feed arrangement.
NOYAFA NF-8209Pro supports cable acceptance testing, RJ45/RJ11 troubleshooting, PoE checks and network port tracing.