zakaz@net-server.com.ua
|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
NOYAFA NF-8506
The NOYAFA NF-8506 is a network cable tester and tracer for RJ45/RJ11 installations with basic IP-network diagnostic functions. WireMap, PoE, PING, IP Scan and Port Flash assist with locating cabling faults and verifying network connections.
Key features
- WireMap checks wire order, open circuits, shorts and crossed conductors.
- Analog and digital tracing modes identify cables within bundles.
- PING checks host reachability, while IP Scan discovers network devices.
- PoE testing detects power delivery over Ethernet.
- Port Flash identifies the connected switch port.
- Cable length measurement up to 200 m supports line assessment.
- NCV and LED lighting make cabinet maintenance easier.
Technical specifications
| Model | NOYAFA NF-8506 |
|---|---|
| Interfaces | RJ45/RJ11 |
| Cable diagnostics | WireMap, trace, length |
| Cable length | Up to 200 m |
| Network tools | PING, IP Scan, Port Flash |
| PoE | Ethernet power check |
| Port speed indication | 10/100/1000 Mbps |
| Power | 3.7 V rechargeable battery, Type-C charging |
Practical benefits and capabilities
NF-8506 is designed to locate faults in both physical cabling and network connectivity. It combines wire mapping and cable length measurement with PING, IP Scan and switch-port identification.
Where it is used
- testing RJ45 and RJ11 after network or telephone cable installation
- tracing cables through bundles and conduits
- checking PoE lines for access points and IP cameras
- checking host reachability using PING
- discovering devices with IP Scan and locating switch ports with Port Flash
How to use the instrument
- Start with WireMap on a disconnected cable to check conductor order, opens and shorts.
- Use the designated length-test port for a cable measurement; the maximum specified range is approximately 200 m.
- Start Port Flash to identify the connected switch port by its flashing indicator.
- Run PING and IP Scan on the operating network for basic diagnostics and use the separate PoE test for power checks.
Important guidelines and limitations
PING and IP Scan provide basic network diagnostics, not full packet analysis. Follow the manufacturer instructions for wire mapping and length tests, and do not apply external voltage to test ports.
Frequently asked questions
Can NF-8506 measure cable length?
Yes. The specified test range extends to about 200 m, depending on cable type and test conditions.
What is PING used for?
It checks host reachability and reports packet responses and losses.
What does IP Scan do?
It helps identify IP addresses of reachable devices in the scanned network segment.
Does NF-8506 include OPM or VFL?
No. Fiber optical-power measurement and a visual fault locator are not listed for this model.
Can it locate a switch port?
Yes. Port Flash helps identify the connected port using the blinking switch LED.
NOYAFA NF-8506 is useful for network installers and administrators who need physical cable checks plus essential IP diagnostics.