zakaz@net-server.com.ua
|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
NOYAFA NF-6304
The NOYAFA NF-6304 is a multifunction digital clamp meter for installation, troubleshooting and maintenance work. It provides current measurements up to 600 A, voltage measurements up to 600 V, True RMS processing, NCV detection and temperature measurement functionality.
Key features
- Clamp-based current testing without opening the circuit.
- AC/DC measurement functions and True RMS processing.
- Resistance, capacitance, frequency and duty-cycle measurement.
- Audible continuity checking and diode testing.
- NCV for preliminary non-contact detection of AC voltage.
- Temperature mode, data hold and automatic range selection.
- Illuminated display for low-light working areas.
Technical specifications
| Model | NOYAFA NF-6304 |
|---|---|
| Maximum current | Up to 600 A |
| Maximum voltage | Up to 600 V |
| Measurement technology | True RMS |
| Jaw opening | 26 mm |
| Power | 2 × 1.5 V AAA batteries |
| Dimensions | 185 × 71 × 35 mm |
| Meter operating temperature | 0 to +40 °C |
Practical benefits and capabilities
NOYAFA NF-6304 combines clamp current measurement with the functions of a digital multimeter. Its approximately 26 mm jaw opening accepts an individual conductor without disconnecting it, while probes support voltage and component measurements.
Where it is used
- monitoring loads in electrical panels and supply circuits
- testing motors, pumps and ventilation equipment
- checking AC/DC voltage and troubleshooting wiring
- testing capacitors, diodes and conductor continuity
- measuring temperature with a compatible sensor during service work
How to use the instrument
- Select the required function and confirm the expected circuit values are within the meter ratings.
- For current, clamp a single conductor; do not include both live and neutral in the jaws.
- Use the correct test lead sockets when checking voltage, resistance, capacitance or frequency.
- Use a suitable temperature probe for temperature measurements; disconnect circuit power before resistance, diode or continuity testing.
Important guidelines and limitations
Observe the markings on the instrument and leads. Clamp only one conductor, and test continuity, resistance or diodes solely on de-energized circuits.
Frequently asked questions
Can current be measured without disconnecting a wire?
Yes. The clamp measures current around a single conductor without opening the circuit.
What does True RMS mean?
It indicates effective AC value measurement, useful for non-sinusoidal signals within the rated limits.
How wide do the jaws open?
The manufacturer specifies an approximately 26 mm jaw opening.
Can NF-6304 measure temperature?
Yes, a temperature mode is listed; a suitable sensor must be used.
Does NCV prove that power is off?
No. NCV is only a preliminary indication and does not replace safe contact testing.
With True RMS, NCV and multiple measurement modes, NOYAFA NF-6304 is suitable for electrical installation and equipment maintenance.