Outdoor Fiber Optic Patch Cord LC/UPC–LC/UPC, MM OM3, 100 m, Duplex UPC-100LCLC(MM)D53(ON)OD

UPC-100LCLC(MM)D53(ON)OD is a professional LC/UPC–LC/UPC Duplex outdoor fiber optic patch cord, 100 meters long, designed for reliable connection of active and passive fiber optic equipment in field environments, outdoor installations, and applications requiring enhanced mechanical protection.

The patch cord is manufactured using MM OM3 multimode optical fiber and features a duplex design with two optical fibers for transmitting and receiving optical signals. Both ends are terminated with compact LC connectors with UPC polishing.

Reinforced Design for Outdoor Applications

The main section of the patch cord is a robust 5 mm round cable. Its construction is fully dielectric and reinforced with fiberglass strength members, providing additional mechanical strength while eliminating metallic elements along the main 100-meter cable section.

A key feature of this model is its 3 mm armored branches located near the optical connectors. Each reinforced branch is approximately 0.5–0.6 m long. Metallic reinforcement is used specifically in these end sections to provide additional protection for the most vulnerable areas of the patch cord against mechanical stress, bending, and damage during installation and operation.

The transition between the main 5 mm cable and the 3 mm branches is protected by a transition sleeve measuring 10 mm in diameter and 35 mm in length.

Designed for Harsh Weather Conditions

The outdoor fiber optic patch cord is designed for operation over a wide temperature range from -40 to +70 °C.

The outer jacket provides UV protection, making the cable suitable for outdoor applications and prolonged exposure to sunlight.

The FRNC jacket provides versatile installation options and makes the patch cord suitable for telecommunications, industrial facilities, and other fiber optic installations.

The recommended installation temperature range is -10 to +50 °C, while the transportation and storage temperature range is -60 to +70 °C.

LC/UPC Duplex Connectivity

Compact LC/UPC connectors are widely used in modern networking and telecommunications equipment, especially where high port density is required.

The patch cord can be used with compatible optical transceivers, network switches, media converters, optical distribution frames (ODF), fiber patch panels, and other equipment equipped with LC optical interfaces.

The Duplex configuration uses two optical fibers, making it suitable for standard bidirectional connections with separate transmit and receive channels (Tx/Rx).

Key Advantages of UPC-100LCLC(MM)D53(ON)OD

• 100 m fiber optic patch cord;

• MM OM3 multimode fiber;

• Duplex configuration — 2 fibers;

• LC/UPC–LC/UPC connectors;

• robust 5 mm round main cable;

• fully dielectric main cable section;

• fiberglass reinforcement;

• 3 mm armored branches near the connectors;

• metallic reinforcement of the end sections;

• armored branch length approximately 0.5–0.6 m;

• protective transition sleeves;

• FRNC outer jacket;

• UV protection for outdoor applications;

• operating temperature from -40 to +70 °C;

• factory-terminated solution requiring no fiber splicing for connection.

Applications

The outdoor LC/UPC fiber optic patch cord is suitable for temporary and permanent fiber optic connections in:

• telecommunications networks;

• network switches and optical transceivers;

• optical distribution frames and active network equipment;

• industrial and manufacturing facilities;

• field telecommunications systems;

• outdoor equipment connections;

• fiber optic data transmission links;

• applications requiring enhanced mechanical protection of cable termination areas.

Technical Specifications

Frequently Asked Questions

Can this fiber optic patch cord be used outdoors?
Yes. The patch cord is designed for outdoor applications, features UV protection, and has an operating temperature range from -40 to +70 °C.

Is the cable armored along its entire length?
No. The main 5 mm cable section is fully dielectric and reinforced with fiberglass. Metallic reinforcement is used only in the 3 mm end branches, each approximately 0.5–0.6 m l